Ka helu: BSQ-EC-2019
Hoʻolauna maʻamau
EC/ER/pH/ORP-2019 series transmitter i hoʻohana nui ʻia no ka hoʻopuka ʻana i ka hōʻailona hōʻailona ʻike wai, e 4-20mA, RS485 a i ʻole TTL, ua hoʻonui ʻia ka hōʻailona nāwaliwali e hoʻouna, hiki ke maʻalahi no ka PLC, ka polokalamu hoʻonohonoho a me E kamaʻilio ʻo SCM ma ka hoʻohana ʻana i ka protocol kamaʻilio maʻamau MODBUS protocol.
Hoʻohana nui ʻia ka transmitter EC / ER / pH / ORP i ka hana metallurgy, ka mana, ka ʻenehana māmā, ka lole lole, nā lako mālama wai, ka ʻoihana paipu wai a me ka noiʻi ʻepekema a me nā ʻoihana ʻē aʻe.
Hoʻolauna moʻo transmitter
'Ōlelo Aʻo: Hiki ke hoʻolako ʻia kahi module o ka transmitter me hoʻokahi wale nōsensor, EC/ER he module, a he module PH / ORP.
①: EC conductivity transmitter;laula: 0 ~ 4000us / knm, 0-10/20/200mS
②: ER resistivity transmitter;laulā: 0 ~ 18.2MΩ
③: pH transmitter;ka laulā: 0 ~ 14.00 pH
④: ORP redox hiki ke hoʻouna;laulā: -2000 ~ + 2000mV
Hōʻike ʻenehana moʻo transmitter
| ʻAʻole. | Laulā | ʻIke like | Ka pololei | Hoʻohui |
| 1 | 0.1~18.25MΩ 0.05～10.00uS） | 1:316L SS hoʻopili i ka 0.01 sensor 2: Hoʻokomo wikiwiki i ka sensor 0.02; | 2 %FS | 1/2″NPT 1/4”Hoʻokomo wikiwiki |
| 2 | 0.1～200.0uS | 316L SS hoʻopili i loko o 0.1 sensor |
| 1/2″NPT） |
| 3 | 0.5～2000uS (maʻamau) | ABS1.0 Pt.ʻIke ʻeleʻele (maʻamau) Hoʻopili ʻo 316L SS i ka sensor 1.0 | 1.5% FS | 1/2″NPT
|
| 4 | 2～4000uS | ABS1.0 Pt.ʻIke ʻeleʻele (maʻamau) Hoʻopili ʻo 316L SS i ka sensor 1.0 | 1.5% FS | 1/2″NPT
|
| 5 | 0.5～10mS | ABS1.0 Pt.ʻIke ʻeleʻele (maʻamau) Hoʻopili ʻo 316L SS i ka sensor 1.0 | 3 % FS | 1/2″NPT
|
| 6 | 0.5～20mS | 1:316LS.S.hoʻopili i ka 10.0 (maʻamau) 2: PTFE+Titanium alloy 10.0 sensor | 1.5 % FS | 1/2″NPT 3/4″NPT |
| 7 | 0.5～100mS | 1:316LS.S.hoʻopili i ka 10.0 (maʻamau) 2: PTFE+Titanium alloy 10.0 sensor | 2 % FS | 1/2″NPT 3/4″NPT |
| 8 | 0.5～200mS | PTFE+Titanium alloy 10.0 sensor | 2 % FS | 3/4″NPT |
EC- Conductivity transmitter kikoʻī kikoʻī,
●Kupaa: ±2×10-3FS/24h,
●Sensor: 1.0cm-1 mau ABS 'enekinia Pt.ʻEleʻele ʻeleʻele, Pākuʻi a hoʻokomo wikiwiki paha (ke koho ʻē aʻe 10.0cm-1 ʻē aʻe),
●Ka nui o ke kaula i hoʻopaʻa ʻia: 1/2″NPT,
●Ka lōʻihi o ke kelepona: ʻO 5m ka lōʻihi maʻamau o ka plug-in,
Ana ʻia ka wela media: 0 ~ 50 ℃,
●Sensor kaomi hana: 0-0.5Mpa,
● ʻIke wela: NTC 10K,
● Temp.uku: Ma ke kumu o 25 ℃, Auto temp.Uku uku.
Nā kikoʻī ʻenehana maʻamau ʻē aʻe,
●Hana i kēia manawa: 4～20mA, kaawale / Koho: 1-5V /2-10V
●Relay output: High/Low limit relay alarm output, Contact point i kēia manawa 24V/3A, 220V/2A ( Passive dry contact)
●Mana: DC12V-28V, 24V(I kēia manawa <=0.1A)
● Kūlana kaiapuni: Ke wela hana: 0～50 ℃, Ka haʻahaʻa pili: ≤ 85%RH
●Aha holoʻokoʻa: 122 × 72 × 45mm (L x W x H), Keʻano hoʻokomo: Hoʻokomo kaʻaahi Kuhina
