China High Performance Wifi Online Web Pressure Transmitter - Online PH transmitter with sensor – JIRS factory and manufacturers

High Performance Wifi Online Web Pressure Transmitter - Online PH transmitter with sensor – JIRS

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for Ro Panel Controller , Water Conductivity Monitor , Ph/Orp/Ec/Tds Controller Meter , While using the tenet of "faith-based, customer first", we welcome customers to phone or e-mail us for cooperation.

High Performance Wifi Online Web Pressure Transmitter - Online PH transmitter with sensor – JIRS Detail:

Code: BSQ-PH-2019
General introduction
EC/ER/pH/ORP-2019 series transmitter mainly used for the water quality monitor sensor signal output, by 4-20mA, RS485 or TTL, the sensor output weak signal is enlarged to transmit, can be convenient for PLC, configuration software and SCM to communicate by adopting standard communication protocol MODBUS protocol.

EC/ER/pH/ORP series transmitter is widely used in metallurgy manufacturing, power, light industry, textile, water treatment equipment, water pipe network and the scientific research and other industrial sectors.

Transmitter series introduction
Note: A module of the transmitter can only be equipped with one
sensor, EC/ER is a module, and PH / ORP is a module.

①: EC conductivity transmitter; range: 0 ~ 4000us / cm, 0-10/20/200mS
②: ER resistivity transmitter; range: 0 ~ 18.2MΩ
③: pH transmitter; range: 0 ~ 14.00 pH
④: ORP redox potential transmitter; range: -2000 ~ + 2000mV

Transmitter series technique specification

No.	Range	Matched sensor	Accuracy	Connection
1	0.1～18.25MΩ 0.05～10.00uS）	1：316L S.S. plug into 0.01 sensor 2：Quick install 0.02 sensor；	2 %FS	1/2″NPT 1/4”Quick install
2	0.1～200.0uS	316L S.S. plug-into 0.1 sensor		1/2″NPT）
3	0.5～2000uS（standard）	ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor	1.5% FS	1/2″NPT
4	2～4000uS	ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor	1.5% FS	1/2″NPT
5	0.5～10mS	ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor	3 % FS	1/2″NPT
6	0.5～20mS	1：316LS.S. plug into10.0 (standard) 2：PTFE+Titanium alloy 10.0 sensor	1.5 % FS	1/2″NPT 3/4″NPT
7	0.5～100mS	1：316LS.S. plug into10.0 (standard) 2：PTFE+Titanium alloy 10.0 sensor	2 % FS	1/2″NPT 3/4″NPT
8	0.5～200mS	PTFE+Titanium alloy 10.0 sensor	2 % FS	3/4″NPT

PH transmitter technique specification
Measuring range: 0～14.00,
Accuracy:2.0%(FS),
Stability: ±2×10-3FS/24h,
Sensor: online PH sensor,
Sensor threaded size: 3/4″ BSP,
Cable length: standard length is 5m,
Measured media temperature:0～50℃,
Temperature sensor: NTC 10K,
Temperature compensation: On basis of 25℃, AUTO or Manual temperature compensation,
Calibration mode: Three points calibration,
PH4.00,PH6.86,PH9.18,

Other common technique specification

Output current: 4～20mA, isolated / Optional:1-5V /2-10V;
Relay output: High/Low limit relay alarm output, Contact point current 24V/3A, 220V/2A ( Passive dry contact)
Power: DC12V-28V, 24V(Current <=0.1A),
Environmental conditions: Working temperature:0～50℃, Relative humidity: ≤ 85%RH,
Overall dimension: 122×72×45mm(L x W x H),
Installation mode: Cabinet rail installation

Product detail pictures:

Related Product Guide:

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for High Performance Wifi Online Web Pressure Transmitter - Online PH transmitter with sensor – JIRS , The product will supply to all over the world, such as: America, Algeria, Ecuador, We aim to become the modern enterprise with the commercial ideal of "Sincerity and confidence" and with the aim of "Offering customers the most sincere services and best quality products". We sincerely ask for your unchanged support and appreciate your kind advice and guidance.

0-5v Pressure Transmitters