China High Quality for Touch Controller - Conductivity TDS Controller – JIRS factory and manufacturers

High Quality for Touch Controller - Conductivity TDS Controller – JIRS

Short Description:

Product Detail

Product Tags

Feedback (2)

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Water Level Controller , Dual Display Orp Monitor , Ph Calibration Powder Ph Meter Sensor , We never stop improving our technique and quality to keep up with the development trend of this industry and meet your satisfaction well. If you are interested in our products, please contact us freely.

High Quality for Touch Controller - Conductivity TDS Controller – JIRS Detail:

Description
◇ English language display.
◇ Measure Conductivity/TDS/Resistivity and Temperature.
◇ High/low limit relay control output , 4-20mAcurrent output. digital Modbus RS485 communication output (Optional).
◇ High/low limit alarm light, double relay, alarm delay could be set.
◇ Instrument mode isolated transmitting port, max circle resistance up to 750Ω.
◇ PID control to actuate and control powered variable value through 4-20 mA output (optional).
◇ Back light of LCD could select power saving mode, timing automatic off, brightness adjust.
◇ Conductivity constant input directly function or to calibrate probe constant as per known calibration solution’s conductivity value.
◇ High performance CPU, good electromagnetic compatibility.
◇ MOV and AC input be fused function.
◇ ESD over voltage protection is available.
◇ Password management avoid non-professional person to operate.

Main Technique Specifications

Function Model	EC/TDS/RM-6850 Conductivity /TDS /Resistivity controller
Measuring Range	Conductivity: 0-200uS ( 0.1sensor), 0-20, 000uS(1.0 sensor), 0-200mS (10.0 sensor) TDS: 0-100ppm(0.1 sensor), 0-10,000ppm(1.0 sensor) Resistivity: 0-18.25MΩ·cm (0.01 sensor) 0-18250KΩ·cm (0.01 sensor)
Accuracy	+ 1.5% (FS)
Temp. Comp.	0～120 ℃, Automatic, PT1000
Sensor constant	0.01, 0.1, 1.0, 10.0 cm^-1
Sensor connection	1/2”NPT (standard), 3/4”NPT(optional), Flanged (optional)
Sensor cable length	5m or as per request
Display	128 * 64 dot matrix LCD
Current output signal	Isolated, Transferable 4-20mA signal output, max circle resistance 750Ω
Control output signal	High/Low Limit relay control output, （3A/250 V AC）
Communication signal	Modbus RTU RS485 (optional)
Power	AC 220V ±10%, 50Hz (Standard) AC110V ±10%, 50Hz (Optional) AC/DC 24V(optional)
Working temperature.	0～60℃, 0～100℃ (Match high temp. Sensor)
Working pressure	0～0.5MPa
Protection grade	IP 65
Working environment	Ambient Temp. 0～60℃, Relative Humidity ≤95%
Overall dimensions	96×96×127mm(high×width×depth)
Hole dimensions	92×92mm(height×width)
Installation Mode	Panel Mounted(Embeded)

Application
Widely used for electronic, Chemical, Pharmaceutical, electromechanical, drinking water, cooling tower, boiler plant and other industries for online conductivity, resistivity controller.

Product detail pictures:

Related Product Guide:

High-quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is constantly observed and pursued by our business for High Quality for Touch Controller - Conductivity TDS Controller – JIRS , The product will supply to all over the world, such as: Jeddah, Kuwait, Cologne, We aim to become the modern enterprise with the commercial ideal of "Sincerity and confidence" and with the aim of "Offering customers the most sincere services and best quality products". We sincerely ask for your unchanged support and appreciate your kind advice and guidance.

24v Controller