China OEM Factory for Ph Orp Transmitter - Online ORP transmitter with sensor – JIRS factory and manufacturers

OEM Factory for Ph Orp Transmitter - Online ORP transmitter with sensor – JIRS

Short Description:

Product Detail

Product Tags

Feedback (2)

Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for Ro Controllers , 24v Controller , Cooling Tower Water Conductvity Controller , Our Company Core Principle: The prestige first ;The quality guarantee ;The customer are supreme.

OEM Factory for Ph Orp Transmitter - Online ORP transmitter with sensor – JIRS Detail:

Code: BSQ-ORP-2019
General introduction
EC/ER/pH/ORP-2019 series transmitter mainly used for the water quality monitor sensor signal output, by 4-20mA, RS485 or TTL, the sensor output weak signal is enlarged to transmit, can be convenient for PLC, configuration software and SCM to communicate by adopting standard communication protocol MODBUS protocol.

EC/ER/pH/ORP series transmitter is widely used in metallurgy manufacturing, power, light industry, textile, water treatment equipment, water pipe network and the scientific research and other industrial sectors.

Transmitter series introduction
Note: A module of the transmitter can only be equipped with one sensor, EC/ER is a module, and PH / ORP is a module.

①: EC conductivity transmitter; range: 0 ~ 4000us / cm, 0-10/20/200mS
②: ER resistivity transmitter; range: 0 ~ 18.2MΩ
③: pH transmitter; range: 0 ~ 14.00 pH
④: ORP redox potential transmitter; range: -2000 ~ + 2000mV

Transmitter series technique specification

No.	Range	Matched sensor	Accuracy	Connection
1	0.1～18.25MΩ 0.05～10.00uS）	1：316L S.S. plug into 0.01 sensor 2：Quick install 0.02 sensor；	2 %FS	1/2″NPT 1/4”Quick install
2	0.1～200.0uS	316L S.S. plug-into 0.1 sensor		1/2″NPT）
3	0.5～2000uS（standard）	ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor	1.5% FS	1/2″NPT
4	2～4000uS	ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor	1.5% FS	1/2″NPT
5	0.5～10mS	ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor	3 % FS	1/2″NPT
6	0.5～20mS	1：316LS.S. plug into10.0 (standard) 2：PTFE+Titanium alloy 10.0 sensor	1.5 % FS	1/2″NPT 3/4″NPT
7	0.5～100mS	1：316LS.S. plug into10.0 (standard) 2：PTFE+Titanium alloy 10.0 sensor	2 % FS	1/2″NPT 3/4″NPT
8	0.5～200mS	PTFE+Titanium alloy 10.0 sensor	2 % FS	3/4″NPT

ORP- ORP(Redox) transmitter technique specification
Measuring range: -2000～+2000mV
Accuracy:1.0 %(FS)
Stability: ±2×10-3FS/24h
Sensor: online ORP sensor
Sensor threaded size: 3/4″ BSP
Cable length: standard length is 5m,
Measured media temperature:0～100℃

4.6 Other common technique specification
Output current: 4～20mA, isolated / Optional:1-5V /2-10V;
Relay output: High/Low limit relay alarm output, Contact point current 24V/3A, 220V/2A ( Passive dry contact)
Power: DC12V-28V, 24V(Current <=0.1A),
Environmental conditions: Working temperature:0～50℃, Relative humidity: ≤ 85%RH,
Overall dimension: 122×72×45mm(L x W x H),
Installation mode: Cabinet rail installation

Product detail pictures:

Related Product Guide:

We pursue the management tenet of "Quality is remarkable, Company is supreme, Name is first", and will sincerely create and share success with all clientele for OEM Factory for Ph Orp Transmitter - Online ORP transmitter with sensor – JIRS , The product will supply to all over the world, such as: Canberra, Chile, Madrid, With excellent solutions, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Welcome customers all over the world to contact us or visit our company. We'll satisfy you with our qualified service!

4-20ma Output Pressure Transmitter