Kodhi: BSQ-PH-2019
General sumo
EC/ER/pH/ORP-2019 inoteedzera transmitter inonyanya kushandiswa kwemvura yemhando yemonitor sensor inobuda, ne4-20mA, RS485 kana TTL, iyo sensor inobuda isina simba chiratidzo inokwidziridzwa kufambisa, inogona kuve yakanakira PLC, gadziriso software uye SCM yekutaurirana nekutora yakajairwa kutaurirana protocol MODBUS protocol.
EC/ER/pH/ORP yakatevedzana transmitter inoshandiswa zvakanyanya mukugadzira simbi, simba, mwenje indasitiri, machira, michina yekuchenesa mvura, pombi yemvura network uye tsvakiridzo yesainzi nemamwe maindasitiri.
Transmitter series sumo
Ongorora: A module ye transmitter inogona chete kushongedzwa neimwe
sensor, EC/ER module, uye PH / ORP imodule.
①: EC conductivity transmitter;mhando: 0 ~ 4000us / cm, 0-10/20/200mS
②: ER resistivity transmitter;mhando: 0 ~ 18.2MΩ
③: pH transmitter;siyana: 0 ~ 14.00 pH
④: ORP redox inogona kutapurirana;siyana: -2000 ~ + 2000mV
Transmitter series tekinoroji yakatarwa
| Aihwa. | Range | Sensor yakaenzana | Kururama | Connection |
| 1 | 0.1 ~18.25MΩ 0.05 ~ 10.00uS） | 1: 316L SS plug mu 0.01 sensor 2: Kurumidza kuisa 0.02 sensor; | 2 %FS | 1/2″NPT 1/4”Kurumidza kuisa |
| 2 | 0.1～200.0uS | 316L SS plug-mu 0.1 sensor |
| 1/2″NPT) |
| 3 | 0.5～2000uS (yakajairwa) | ABS1.0 Pt.Black sensor (yakajairwa) 316L SS plug mune 1.0 sensor | 1.5% FS | 1/2″NPT
|
| 4 | 2～4000uS | ABS1.0 Pt.Black sensor (yakajairwa) 316L SS plug mune 1.0 sensor | 1.5% FS | 1/2″NPT
|
| 5 | 0.5～10mS | ABS1.0 Pt.Black sensor (yakajairwa) 316L SS plug mune 1.0 sensor | 3% FS | 1/2″NPT
|
| 6 | 0.5 ~ 20mS | 1:316LS.S.plug mu10.0 (yakajairwa) 2: PTFE+Titanium alloy 10.0 sensor | 1.5 % FS | 1/2″NPT 3/4″NPT |
| 7 | 0.5 ~100mS | 1:316LS.S.plug mu10.0 (yakajairwa) 2: PTFE+Titanium alloy 10.0 sensor | 2% FS | 1/2″NPT 3/4″NPT |
| 8 | 0.5 ~200mS | PTFE+Titanium alloy 10.0 sensor | 2% FS | 3/4″NPT |
PH transmitter tekinoroji yakatarwa
Kuyera chiyero: 0 ~ 14.00,
Kururama:2.0%(FS),
Kugadzikana: ± 2 × 10-3FS / 24h,
Sensor: online PH sensor,
Sensor yakarukwa saizi: 3/4 ″ BSP,
Cable kureba: yakajairika kureba 5m,
Yakayerwa midhiya tembiricha:0～50℃,
Tembiricha sensor: NTC 10K,
Tembiricha muripo: Pahwaro hwe25 ℃, AUTO kana Manual tembiricha muripo,
Calibration mode: Matatu mapoinzi calibration,
PH4.00,PH6.86,PH9.18,
Zvimwe zvakajairika tekinoroji yakatarwa
Kubuda ikozvino: 4～20mA, yakasarudzika / Optional: 1-5V / 2-10V;
Relay kubuda: Yakakwira / Yakaderera muganho relay alarm kubuda, Bata poindi yazvino 24V / 3A, 220V / 2A (Passive yakaoma kubata)
Simba: DC12V-28V, 24V(Iyezvino <=0.1A),
Mamiriro ezvakatipoteredza: Kushanda tembiricha:0～50℃, Hunyoro hunyoro: ≤ 85%RH,
Kukura kwese: 122×72×45mm(L x W x H),
Installation mode: Cabinet rail installation
