China Wholesale Dissolved Ozone Sensor 4-20ma - Online Conductivity TDS Sensor CR-102S – JIRS factory and manufacturers

Wholesale Dissolved Ozone Sensor 4-20ma - Online Conductivity TDS Sensor CR-102S – JIRS

Short Description:

Product Detail

Product Tags

Feedback (2)

Our advancement depends on the superior gear ,superb talents and consistently strengthened technology forces for Ph Controller With Ph Sensor , Online Gas Leak Transmitter , Online Ph Monitoring , Now we have experienced manufacturing facilities with extra than 100 employees. So we could guarantee short lead time and high quality assurance.

Wholesale Dissolved Ozone Sensor 4-20ma - Online Conductivity TDS Sensor CR-102S – JIRS Detail:

Pls unpack and check that the sensor has been supplied undamaged and that it is the correct option as ordered. If you have any problems please contact your supplier.

Application
Widely used for industrial water, tap water, cooling water, pure water etc. Conductivity measurement.

Main technique specification

Name	Function
Cell Constant	0.05cm^-1 ( v ) 0.1cm^-1 ( ) 1.0cm^-1( ) 10.0cm^-1( )
Electrode structure	Bipolar
Electrode material	ABS ( ) 316L Stainless steel( v )
Temperature Sensor	NTC 10K ( v ) Pt 1000 ( ) Pt 100 ( )
Thread structure	½” NPT Thread
Working pressure	0～0.5MPa
Operating temperature	0～50℃
Cable length	Standard：5m or others(5-30m)

Dimensions drawing
Conductivity-meter5

Conductivity(TDS)/ Resistivity electrode dimensions

Installation and maintenance
Installation: To ensure the real measurement result, data distortion caused by air bubble or dead water in conductance cell should be avoided. The installation should be performed strictly according to the following drawing:

Conductivity-meter6

Notes
1. The electrode should be installed at a lower location in the pipe where the flow speed is steady and air bubbles are seldom generated.
2. No matter the conductance cell is horizontally or vertically installed, it should be deeply inserted into the moving water.
3. The conductivity/Resistivity signal is weak electronic signal and its collecting cable should be separately installed.
When threading cable joint or connecting terminal board is used, to avoid wetting interference or breakdown of measurement unit circuit, they should not be connected to the same group of cable joint or terminal board with the power or control line.
4. When the measurement cable needs to be lengthened, it’s recommended to use the cable provided by the original manufacturer, and the joint should be subject to reliable damp-proofing insulation disposal. When a longer distance is involved, the length of the cable (<30m) should be agreed on before delivery, and if the length is over 30m, a transmitter should be used.

Electrode Maintenance
1. The electrode cell should not be soaked in strong acid or alkali liquid, and the platinum black coating should not be wiped or it will lead to electrode surface damage and the constant and response capability will be affected. The right way should be: when the electrode is dirty, soak it in 10% dilute hydrochloric acid for a short while, then rinse it with pure water to keep the surface clean.
2. The measurement cable is special cable and should not be changed at will or it will cause significant error.

Joint wire
white wire to Cell -INPUT
Yellow wire to Cell -OUPUT
Black wire-TEMP
Red wire-TEMP

JiShen Water treatment Co., Ltd.
Add: No.18, Xingong Road, High-Technology Area, Shijiazhuang,China
Tel: 0086-(0)311-8994 7497 Fax:(0)311-8886 2036
E-mail：info@watequipment.com
Website: www.watequipment.com

Product detail pictures:

Related Product Guide:

We always do the job to be a tangible group making sure that we can provide you with the top top quality as well as ideal value for Wholesale Dissolved Ozone Sensor 4-20ma - Online Conductivity TDS Sensor CR-102S – JIRS , The product will supply to all over the world, such as: Ghana, Curacao, Nigeria, If any item be of interest to you, you should let us know. We will try our best to satisfy your requirements with high quality goods, the best prices and prompt delivery. You should feel free to contact us at any time. We will reply you when we receive your inquiries. Make sure you note that samples are available before we start our business.

Conductivity Ec-8850

Conductivity Sensor

Conductivity Sensor For Hydroponic

Deionized Water Resistivity

Digital Sensor

Dissolved oxygen sensor

Hydroponic Conductivity Sensor

Seawater Ro

Sensor Rs485

Water Conductivity

The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!