online Conductivity/TDS Controller EC,TDS-600

Short Description:

The intelligent conductivity controller EC,TDS-600 are new generation upgraded monitor CM-230

Keyboard range switch over, constant input and high/Low limit relay setup

Automatic digital temperature compensation

High/Low limit relay control (alarm) output

Isolation 4~20mA (or 0-5V DC) output signal

Modbus RTU RS 485 communication output (Optional)

ESD and MOV protection function

Strong anti-interface function


Product Detail

Product Tags

 Function Model EC/TDS-600 online Conductivity/TDS Controller
Range 0-2000uS, 0-2000ppm,0-9999uS/cm(0-10mS),0-5000PPM0-20mS, 0-200mS
Accuracy 1.5%(FS)
Temp. Comp. The 25℃ basis, automatic temperature compensation
Operation Temp. 0~50℃, with normal temp. Pt. Black or Stainless steel sensor
60~100℃, with high temperature Stainless steel sensor sensor(optional)
Sensor K= 0.1 (0-20uS, 0-10ppm)
K=0.1(0-200uS, 0-100ppm),
K=1.0 or 10.0 (0-2000uS/ ppm,0-9999uS/ppm, 0-10mS, 0-20mS),
K=30.0cm (0-200mS)
Display 3½ Bit LCD
Control output signal Two groups, ON/OFF High limit and low limit relay
Capacity of contact point 3A/AC 250V (with resistant loads)
Current output signal 4-20mA/ 0-5V DC signal output, isolated and migrated
Communication output Moudbus RTU RS485 (optional)
Power AC 110/220V±10%, 50/60Hz, DC 24v
Working environment Ambient Temp. 0~50℃, Relative Humidity ≤85%
Overall dimensions 48×96×100mm (H X W X D), Hole size: 45×92mm (H X W)
Installation Mode Panel Mounted(Embedded)
Cable length: 5m or as per request

Widely used for electrodialysis, reverse osmosis, ion exchange water system, hydroponic Fertilizer,cooling water control system and general industrial water online monitoring and controlling.


  • Previous:
  • Next:

  • Write your message here and send it to us