Cutubka 1 Tilmaamaha Alaabta
| Tilmaamaha | Faahfaahin |
| Cabbirka | Dhexroorka 49.5mm* Dhererka 251.1mm |
| Miisaanka | 1.4KG |
| Qalabka ugu muhiimsan | SUS316L+PVC (Nooca caadiga ah), Titanium Alloy (Nooca Biyaha Badda) |
| O-ring: Fluoro- caag | |
| Cable: PVC | |
| Heerarka biyuhu celinayaan | IP68/NEMA6P |
| Qiyaasta Qiyaasta | 0-20mg/L (0-20ppm) |
| Heerkulka: 0-45 ℃ | |
| Qaraarka Tilmaamaha | Xallinta: ± 3% |
| Heerkulka: ± 0.5 ℃ | |
| Heerkulka Kaydinta | -15 ~ 65 ℃ |
| Heerkulka Deegaanka | 0 ~ 45 ℃ |
| Xaddiga Cadaadiska | ≤0.3Mpa |
| Bixinta Korontada | 12 VDC |
| Calibration | Si toos ah u hagaajinta hawada,Sample calibration |
| Dhererka fiilada | Heerka 10-Meter Cable, Dhererka ugu badan: 100 Mitir |
| Muddada dammaanadda | 1 Sano |
Cabirka Dibadda | |
Shaxda 1 Tilmaamaha Farsamada Dareenka Ogsajiinta ee Kala Diray
Cutubka 2aad Macluumaadka Alaabta
Dareemka oksijiinta ee kala diri waxa uu ku cabbiraa Ogsajiinta kala diri habka fluorescence, iyo iftiinka buluuga ah ee la sii daayo waxa uu ku shidan yahay lakabka fosfooraska.Walaxda fluorescent ayaa la kiciyay si ay u sii dayso iftiinka cas, iyo feejignaanta ogsajiinta waxay la mid tahay marka walaxda fluorescent ay ku soo noqoto xaaladda dhulka.Isticmaalka habkan si loo cabbiro ogsijiinta kala diri, ma soo saari doonto isticmaalka oksijiinta, sidaas darteed hubinta xasilloonida xogta, waxqabad la isku halleyn karo, faragelin la'aan, iyo rakibid fudud iyo habeyn.
Alaabta ayaa si weyn loogu isticmaalaa warshadda bulaacada, warshadda biyaha, saldhigga biyaha, biyaha dusha sare, beerashada, warshadaha iyo beeraha kale.Muuqaalka dareeraha ogsijiinta ee kala dareeray waxa lagu muujiyey sida jaantuska 1.
Jaantuska 1 Muuqaalka Dareemka Ogsajiinta ee Kala Diray
| 1- Daboolka cabbirka | 2- Dareemka Heerkulka | 3- R1 |
| 4- Wadajir | 5- Koofida ilaalinta |
|
Cutubka 3aad Rakibaadda
3.1 Rakibaadda Dareemayaasha
Tallaabooyinka rakibida gaarka ah waa sida soo socota:
a.Ku rakib 8 ( saxan dhejis ah) oo ku yaal biraha barkada oo leh 1 (M8 U-qaabaynta qaabka) ee booska kor u qaadista;
b.Ku xidh 9 (adapter) 2 (DN32) tuubbada PVC adigoo isticmaalaya xabag, u gudbi fiilada dareemayaasha ee tuubada Pcv ilaa uu shidmahu galo 9 (adapter), oo samee daaweynta biyuhu;
c.Ku hagaaji 2 (tuubo DN32) oo ku dheji 8 ( saxan ku dhejisan ) 4 (xajinta qaabka DN42U).
Jaantuska 2 Jaantuska Jaantuska ee Rakibaadda Dareemka
| 1-M8U-qaabka-qabsiga (DN60) | 2- DN32 Dhuumaha (dhexroorka ka baxsan 40mm) |
| 3- Hexagon Socket Screw M6*120 | 4-DN42U-qaabka tuubada |
| 5- M8 Gasket (8*16*1) | 6- M8 Gasket (8*24*2) |
| 7- M8 Spring Shim | 8- Taarikada lagu dhejiyo |
| 9- Adaptor (Xadhiga ilaa Toosan) | |
3.2 Isku xirka Sensor
Dareemaha waa in si sax ah loogu xidhaa qeexida soo socota ee xudunta siliga:
| Taxane No. | 1 | 2 | 3 | 4 |
| Cable-ka dareemayaasha | bunni | Madow | Buluug | Caddaan |
| Signal | + 12VDC | AGND | RS485 A | RS485 B |
Cutubka 4-aad ee Qalabaynta Dareemayaasha
Dareemaha oksijiinta ee kala diri ayaa lagu hagaajiyay warshadda, oo haddii aad u baahan tahay inaad naftaada hagaajiso, raac tillaabooyinka hoose
Tallaabooyinka gaarka ah waa sida soo socota:
①Laba-guji "06", oo sanduuq ayaa ka soo baxay dhanka midig.U beddel qiimaha 16 oo guji "Send".
② Qalaji dareemaha oo geli hawada, ka dib marka xogta la cabbiray ay xasilloonaato, laba jeer guji "06", u beddel qiimaha 19 oo guji "Send".
Cutubka 5aad Hab-maamuuska Isgaarsiinta
Dareemuhu waxa uu ku qalabaysan yahay MODBUS RS485 isgaarsiineed, fadlan tixraac qaybtan buug-gacmeedka 3.2 si aad u hubiso xargaha isgaadhsiinta.Qiimaha baud ee caadiga ah waa 9600, shaxda gaarka ah ee MODBUS RTU waxa lagu muujiyay shaxda soo socota.
| MODBUS-RTU | |
| Heerka Baud | 4800/9600/19200/38400 |
| Xogta Bits | 8 xoogaa |
| Hubinta sinnaanta | no |
| Jooji xoogaa | 1bit |
| Magaca Diiwangelinta | CinwaankaGoobta | XogtaNooca | Dhererka | Akhri/qor | Sharaxaada | |
| Qiimaha Ogsajiinta Kala Diray | 0 | F (sabayn) | 2 | R (kaliya akhri) | Qiimaha Ogsajiinta Kala Diray | |
| Isku-darka Ogsajiinta ee Kala Diray | 2 | F | 2 | R | Isku-darka Ogsajiinta ee Kala Diray | |
| Heerkulka | 4 | F | 2 | R | Heerkulka | |
| Jiirada | 6 | F | 2 | W/R | Baaxadda:0.5-1.5 | Jiirada |
| Qiimaha leexashada | 8 | F | 2 | W/R | Baaxadda:-20-20 | Qiimaha leexashada |
| Saliidnimada | 10 | F | 2 | W/R | Saliidnimada | |
| Cadaadiska Hawada | 12 | F | 2 | W/R | Cadaadiska Hawada | |
| Heerka Baud | 16 | F | 2 | R | Heerka Baud | |
| Ciwaanka addoonsiga | 18 | F | 2 | R | Qiyaasta: 1-254 | Ciwaanka addoonsiga |
| Waqtiga Jawaabta ee Akhriska | 20 | F | 2 | R | Waqtiga Jawaabta ee Akhriska | |
| Isbedelka Baud Heerka | 16 | Saxiixay | 1 | W | 0-48001-96002-19200 3-38400 4-57600 | |
| Wax ka beddel cinwaanka addoonsiga | 17 | Saxiixay | 1 | W | Qiyaasta: 1-254 | |
| Wax ka beddel wakhtiga jawaabta | 30 | Saxiixay | 1 | W | 6-60aad | Wax ka beddel wakhtiga jawaabta |
| Qalabaynta Hawada | Tallaabada 1 | 27 | Saxiixay | 1 | W | 16 |
| Tallaabada 2 | 27 | Saxiixay | 1 | W | 19 | |
| Waa in la tirtiro haddii aadan rabin inaad saxdo ka dib fulinta "Tallaabada 1". | ||||||
| Jooji | 27 | Saxiixay | 1 | W | 21 | |
| Xeerka Shaqada | R:03 U qor 06 sidii xogta dib u qaabaynta 06 U qor 16 sida xogta barta sabbaynaysa | |||||
Cutubka 6aad Dayactirka
Si loo helo natiijooyinka cabbiraadda ugu wanaagsan, aad bay lagama maarmaan u tahay in la ilaaliyo dareemaha si joogto ah.Dayactirka inta badan waxaa ka mid ah nadiifinta, baarista dhaawaca dareemaha, iyo habeynta xilliyeed.
6.1 Nadiifinta Dareemaha
Waxaa lagu talinayaa in dareemaha la nadiifiyo waqtiyo joogto ah (sida caadiga ah 3 bilood, iyadoo ku xiran deegaanka goobta) si loo hubiyo saxnaanta cabbirka.
Isticmaal biyo si aad u nadiifiso dusha sare ee dareenka.Haddii ay weli jiraan burbur, ku tirtir maro jilicsan oo qoyan.Ha dhigin dareemaha iftiinka qorraxda tooska ah ama shucaaca u dhow.Nolosha dareemaha oo dhan, haddii wadarta wakhtiga cadceeddu gaadho hal saac, waxa ay sababi doontaa gabowga koofiyada fluorescent iyo khalad, taas awgeedna u horseedaysa akhris khaldan.
6.2 Kormeerka Burburka Dareemaha
Marka loo eego muuqaalka dareenka si loo hubiyo haddii uu jiro dhaawac;haddii wax dhaawac ah la helo, fadlan la xidhiidh xarunta dayactirka adeegga iibka ka dib wakhtiga beddelka si aad uga hortagto cilladda dareemaha ay sababaan biyaha daboolka dhaawacan.
6.3 Ilaalinta Sensor
A. Marka aanad isticmaalin, fadlan dabool daboolka ilaalinta asalka ah ee alaabta si aad uga fogaato iftiinka qorraxda tooska ah ama soo-gaadhista.Si dareemaha looga ilaaliyo inuu qaboojinayo, baaritaanka DO waa in lagu keydiyaa meel uusan barafoobayn.
B. Baarista nadiifi ka hor inta aanad kaydin muddo dheer.Qalabka ku hay sanduuqa maraakiibta ama weel caag ah oo leh ilaalinta shoogga koronto.Iska ilaali inaad ku taabato gacanta ama shay kale oo adag haddii aad xoqdo daboolka fluorescent.
C. Waa mamnuuc in koofiyada fluorescent ay la kulmaan iftiinka qorraxda tooska ah ama soo-gaadhista.
6.4 Bedelida Koofida Cabbirka
Daboolka cabbirka dareemaha wuxuu u baahan yahay in la beddelo marka uu dhaawacmo.Si loo hubiyo saxnaanta cabbirka, waxaa lagula talinayaa in la beddelo sannad kasta ama waxaa lagama maarmaan ah in la beddelo marka daboolka la helo si aad ah u dhaawacmay inta lagu jiro kormeerka.
Cutubka 7 Adeegga Iibka Kadib
Haddii aad qabto wax su'aalo ah ama aad u baahan tahay adeegga dayactirka, fadlan nala soo xiriir sida soo socota.
Hal qayb oo ka mid ah JiShen Water treatment Co., Ltd.
Kudar: No.2903, Dhismaha 9, Aagga C, Beerta Yuebei, Wadada Fengshou, Shijiazhuang, Shiinaha.
Tel: 0086-(0)311-8994 7497 Fakis:(0)311-8886 2036
Iimayl:info@watequipment.com
Website: www.waterquipment.com