I-Online Conductivity TDS Sensor CR-102S

Incazelo emfushane:

Igama Umsebenzi
Iseli Elihlala njalo 0.05cm-1 ( v )0.1cm-1 ( )

1.0cm-1 ( )

10.0cm-1 ( )

Isakhiwo se-Electrode I-Bipolar
Izinto ze-Electrode I-ABS ()316L Insimbi engagqwali(v)
Inzwa Yezinga lokushisa I-NTC 10K ( v )I-Pt 1000 ( )

I-Pt 100 ( )

Isakhiwo somucu ½” Uchungechunge lwe-NPT
Ingcindezi yokusebenza 0 ~ 0.5MPa
Izinga lokushisa lokusebenza 0~50℃
Ubude bekhebula Izinga: 5m noma abanye (5-30m)


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Pls khumula futhi uhlole ukuthi inzwa ayihlinzekiwe ingonakalisiwe nokuthi iyinketho elungile njengoba kuyaliwe.Uma unezinkinga sicela uxhumane nomphakeli wakho.

Isicelo
Isetshenziselwa kakhulu amanzi ezimboni, amanzi kampompi, amanzi okupholisa, amanzi ahlanzekile njll. Isilinganiso se-conductivity.

Ukucaciswa kwesu elikhulu

Igama

Umsebenzi

Iseli Elihlala njalo

0.05cm-1 (v)

0.1cm-1 ()

1.0cm-1()

10.0cm-1 ()

Isakhiwo se-Electrode

I-Bipolar

Izinto ze-Electrode

I-ABS ()

316L Insimbi engagqwali(v)

Inzwa Yezinga lokushisa

I-NTC 10K ( v )

I-Pt 1000 ( )

I-Pt 100 ( ) 

Isakhiwo somucu

½” Uchungechunge lwe-NPT

Ingcindezi yokusebenza

0 ~ 0.5MPa

Izinga lokushisa lokusebenza

0~50℃

Ubude bekhebula

Izinga: 5m noma abanye (5-30m)

Umdwebo wobukhulu
I-Conductivity-imitha5

I-Conductivity(TDS)/ Ubukhulu be-electrode obungazweli

Ukufakwa nokugcinwa
Ukufakwa: Ukuqinisekisa umphumela wangempela wokulinganisa, ukuhlanekezelwa kwedatha okubangelwa ibhamuza lomoya noma amanzi afile kuseli ye-conductance kufanele kugwenywe.Ukufakwa kufanele kwenziwe ngokuqinile ngokulandela umdwebo olandelayo:

I-Conductivity-imitha6

Amanothi
1. I-electrode kufanele ifakwe endaweni ephansi epayipini lapho ijubane lokugeleza lizinzile nomoyaamabhamuza awavamile ukukhiqizwa.
2. Kungakhathaliseki ukuthi iseli ye-conductance ifakwe ivundlile noma iqondile, kufanele ifakwe ngokujulile emanzini ahambayo.
3. I-conductivity/Isiginali ye-Resistivity iyisiginali ye-elekthronikhi ebuthakathaka futhi ikhebula layo lokuqoqa kufanele lifakwe ngokuhlukile.
Lapho kusetshenziswa intambo yokuhlanganisa intambo noma ibhodi letheminali yokuxhuma, ukugwema ukuphazamiseka kokumanzisa noma ukuwohloka kwesekethe yeyunithi yokulinganisa, akufanele axhunywe eqenjini elifanayo lejoyinti yekhebula noma ibhodi letheminali enamandla noma ulayini wokulawula.
4. Uma ikhebuli yokulinganisa idinga ukunwetshwa, kuyanconywa ukusebenzisa ikhebula elihlinzekwe ngeyokuqalaumkhiqizi, futhi ijoyinti kufanele libe ngaphansi kokulahlwa kokufakwa okuthembekile kokuvikela umswakama.Uma kubandakanyeka ibanga elide, ubude bekhebula (<30m) kufanele kuvunyelwane ngabo ngaphambi kokulethwa, futhi uma ubude bungaphezu kwama-30m, kufanele kusetshenziswe isidlulisilwazi.

Electrode Maintenance
1. Iseli ye-electrode akufanele ifakwe ku-asidi eqinile noma uketshezi lwe-alkali, futhi i-platinum black coating akufanele isulwe noma izoholela ekulimaleni kwendawo ye-electrode futhi amandla angaguquki kanye nokuphendula azothinteka.Indlela efanele kufanele ibe: lapho i-electrode ingcolile, cwilisa ku-10% dilute i-hydrochloric acid isikhashana, bese uyihlanza ngamanzi ahlanzekile ukuze ugcine ubuso buhlanzekile.
2. Ikhebula lokulinganisa ikhebula elikhethekile futhi akufanele lishintshwe ngokuthanda kwakho noma lizodala iphutha elibalulekile.

Intambo ehlangene
intambo emhlophe kuSeli -INPUT
Intambo ephuzi kuSeli -OUPUT
Intambo emnyama-TEMP
Intambo ebomvu-TEMP

Izindleko zamasheya JiShen Water treatment Co., Ltd.
Engeza: No.18, Xingong Road, High-Technology Area, Shijiazhuang, China
Ucingo: 0086-(0)311-8994 7497 Ifeksi:(0)311-8886 2036
I-imeyili:info@watequipment.com
Iwebhusayithi esemthethweni: www.watequipment.com






  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona